2
3
4
10
1
7
10
8
9
5
6
Attach the Rear Wheels │ 6
Normal wheel
Rear axle
Rear Bottom View
Driving wheel
Remove all the parts from the rear axle.
1. Slide the
gear box
onto the rear axle from
Left Side
(“R” labeled gear box should be fit
to the “R” side, “L” labeled gear box should be fit to the “L” side), keep the connector
and the motor on the gear box pass through the larger hole and out where the battery
sits.
2. Slide the
driving wheel
onto the rear axle. Keep it match up with the gear box.
3. Slide a
Ø12 washer
onto the rear axle.
4. Tighten a
lock nut
to the end of the rear axle with a spanner.
1WD
HINT: If your vehicle is Two Wheels Driving Type, see the next page please.
5. Slide the
Ø12 washer
onto the rear axle
(Right Side).
6. Insert the
bushing
into the hole in the center of the normal wheel.
7. Slide the
normal wheel
onto the rear axle.
8. Slide the
Ø12 washer
onto the rear axle.
9. Tighten a
lock nut
to the end of the rear axle with a spanner.
HINT: An extra
spanner has been provided to hold the Lock Nut on the other side of the rear
axle while tightening the Lock Nut on the other side.
10. Fit the
hubcaps
to the wheels.
