INST.No.INE-374-P11
- 16 -
Mem
I
M I
6.2 Storage-with-interval mode
・
Press [MODE] key for about 2 seconds on the measurement screen to get the storage mode
programming screen.
・
Press
key for programming to “Int”.
・
Press ENT key to store the storage-with-interval mode.
The
I
marker lights when the storage-with-interval mode is stored.
・
Press MODE key once to get the interval time programming screen.
・
Press
key to shift the digit and press
key to program the interval time.
・
Press [ENT] key to store the interval time programmed. On this stage, the storage-with-interval
function does not activate.
・
Press MODE key for about 2 seconds to get the measurement screen.
・
Press MEM key to make the storage-with-interval function activate. The M marker lights in
addition to the I
marker on the function activated.
・
Press MEASURE key to start the measurement.
The temperature data at every interval time
programmed are stored into memory and the message “Data Stored” appears each time at the
temperature data storage.
・
To cancel the storage-with-interval function temporarily, press MEM key. The M marker lights
out.
The programming range of interval time is 1 second to 2 hours (0:00:01 to 2:00:00).
・
The default interval time is 1 minute (0:01:00).
M M O D
O
f
f
I
n
t
:
0
0
:
1
0
0
D a
t
a
r
e
d
S
o
t
Remarks
