............................................................................................................................................................. 13
Multimedia LCD DISPLAY installation & operation
Remote Control
1. POWER
Turn on the Multimedia LCD Display or enter
STANDBY mode.
2. MUTE
Press to toggle audio on and off. You can also press
/- to restore the previous volume level.
3. FREEZE
Press to freeze the main screen and press again to
restore live viewing.
4. SLEEP
Press repeatedly to select one of the available sleep
OFF/30/60/90/120 minutes modes.
5. VOL +/- </->
Press to adjust the volume.
6. Channel
Press to select the channels.
7. 0 ~ 9, 100/- Numeric key
Using the numeric buttons (0 to 9 and 100/-) to
select from CH 02 to CH 125. When the channel
selected exceeds CH 125, the window will stay on
the channel set and won’t be switched.
8. RETURN
Return to the previous channel.
9. ENTER
When entering CH 1 to CH 9, you may just enter
number 1 to 9 and wait for a few seconds for auto
changing; or you may simply press number 1 to 9
then the ENTER key to switch to the channel
directly.
10. Display
Press the DISPLAY button to display the current
mode. Including input source/channel/aspect/audio
mode.
11. C.C.: Close Caption
This allows you to enable the caption function. (This
function only applies to the NTSC system used in
North America)
12. TV/VIDEO
For the signal source of main screen.
1. You can use the “TV/VIDEO” button on the
remote control to switch the signal source of main
screen.
The switching sequences of main screen are
TV/Video/S Video/YPbPr/HDMI/PC respectively.
2. The selected signal source will be displayed on
upper right of the screen.
3. The special items to the OSD MENU under each
display mode can be selected.
Summary of Contents for TL-24L6000T
Page 1: ......
