![background image](http://html1.mh-extra.com/html/chief/velocity/velocity_assembly-manual_2600259002.webp)
Velocity
®
Workstation —
Assembly Instructions
This manual contains basic guidelines for the initial assembly of the Velocity
®
Workstation. Refer to it often
to be certain that all components are installed correctly and all wiring is accurate.
IMPORTANT:
Before starting the assembly process, remove keys (and cable harness) from top of work-
station and remove all components from the drawers and compartments.
Tools Required:
7/16” Wrench
1. Attach power cord brackets to back of
workstation. (Figure 1.)
2. Attach monitor / keyboard platform to top of
workstation. (Figure 2.) Use mounting holes
that will position keyboard at front edge of
workstation.
3. Remove adhesive tape from wrist pad and
place on mounting platform at front of work-
station. Position mouse pad to “right” or “left”
side of wrist pad. (Figure 3.)
1
1
2
3