31. Insert nylon bolt clips in drawer as shown.
(Figure 43.)
32. Insert threaded bolt attachments in holes next
to nylon bolt clips. (Figure 44.)
33. Insert magnetic bolt attachments in the
remaining holes making sure their numbers
match the numerical references in the tray.
(Figure 45.)
34. Place Velocity owners / parts manual binder at
rear of drawer. (Figure 46.)
Upper Left Hand Drawer
9
IMPORTANT:
If additional magnetic attachments
are to be stored at the rear of this drawer,
switch this drawer with the middle left hand
drawer.
43
44
45
46
