8. Connect power cable to rear of monitor
(Figure 8) and route monitor signal cable
through hole at rear of workstation (Figure 9).
9. Position mouse on pad (Figure 10) and route
USB cable through hole at rear of workstation
(Figure 11).
10. Cut double-sided tape (Figure 12) and attach
tape to side of each speaker (Figure 13) and
to mounting locations on monitor. Then
remove the paper backing.
NOTE:
Cut tape to match height of speaker.
11. Attach speakers to sides of monitor (Figure
14) and route speaker cable and electrical
cord through hole at rear of workstation.
(Figures 15 and 16.)
NOTE:
Speaker with volume control should be
on left side of monitor when facing
front of workstation.
3
8
9
10
11
12
13
14
15
16
