A
B
C
D
E
F
38. Install hole caps, nut/stud caps, and
side hole clips in rows at rear of drawer.
Also install magnetic hole attachments
in numerical holes and install the verti-
cal surface attachments identified by
the following letters. (Figure 50.)
39. Install Target bases in lower right hand cor-
ner of lower drawer. (Figure 51.)
40. Install upper body bar pointers in slot at right
side of drawer. (Figure 52.)
Middle Right Hand Drawer
A.
Adhesive base
B.
Magnetic base
C.
Pendant set screws, ball socket
clips, ball socket stems, set screw
bolts.
D.
200mm stem assemblies
E.
100mm stem assemblies
F.
400mm stem assemblies
11
Hole Caps
Magnetic Hole
Attachments
Side Hole Clips
Nut/Stud Caps
Lower (Wide) Drawer
50
51
52