LVM Series
Installation Instructions
16
6.
Starting from the bottom and working up, hang interface
brackets (AA and BB) to display rails (K or L and KK). (See
Figure 17)
WARNING:
Improper display installation to the cart can
result in serious personal injury or damage to equipment!
Install displays from the bottom to the top to decrease the risk
of tipping the mount during installation. Do not mount all of
the displays on one side prior to installing the displays evenly
in each row. On the LVM3X3, mount the center displays in
each row prior to installing the outside displays. See Figure
17 for an ideal mounting order for the LVM3X3. See Figure 18
for unacceptable and risky installation mounting orders.
Figure 17
Figure 18
7.
Use 1/4-20 x 1 1/4" socket head cap screws (I) to secure
interface brackets (AA and BB) to rails for each display.
Screws must engage through both holes to be fully secured.
(See Figure 19)
NOTE:
Display positions may need to be adjusted after height
and/or plumb adjustments in order to maintain desired
alignment.
Figure 19
Column Cap Installation
NOTE:
If the top holes on columns will be used for cable
management, do NOT install column caps to columns
as illustrated below. See Cable Management section
for details.
1.
Use four 5/16-18 x 1/2" button head cap screws (LL) to
install each column cap (N) to each column. (See Figure 20)
Figure 20
1
2
3
4
5
6
7
8
9
2
1
3
2
1
3
1
2
3
(I) x 2
underside view
7
(N)
1
(LL) x 4