Installation Instructions
LVM Series
11
5.
Place two extender blocks (U) in position between two
extender brackets (W). Be sure to line up holes on blocks
and brackets. (See Figure 4)
Figure 4
6.
While holding extender blocks in position, install four 5/16-
18 x 2 1/2" button head cap screws (EE) through extender
brackets (W), extender blocks (U) and into remaining cart
array column (M). (See Figure 5)
IMPORTANT ! :
Be sure to use interior holes when
connecting to the front of the column and exterior holes
when connecting to back of column. (See Inset on Figure
5)
Figure 5
7.
Use four 5/16-18 x 5" button head cap screws (GG), four
5/16" washers (JJ) and four 5/16-18" lock nuts (NN) to
secure left and right legs (CC and DD) to cross bar (J). (See
Figure 6)
8.
Use two 5/16-18 x 4 1/2" button head cap screws (Y) and
two 5/16" washers (JJ) to secure second right leg (DD) to
extender blocks (U). (See Figure 6)
9.
Stand cart up on its wheels.
(U) x 2
(W) x 2
5
(EE) x 4
6
(M)
interior holes
front
back
exterior holes
Figure 6
7
(NN) x 4
(CC)
(JJ) x 4
(GG) x 4
7
(JJ) x 2
(Y) x 2
8
(DD) x 2