Installation Instructions
LCM2X1U / LCM2X1UP
11
2.
Align the center of the interface bracket (EE) with center of
screen. (See Figure 8)
NOTE:
The diamond-shape hole in the bracket corresponds to
the center of the mount.
Figure 8
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Using screws of
improper size may damage your display. Properly sized
screws will easily and completely thread into display
mounting holes. If spacers are required, be sure to use longer
screws of the same diameter.
3.
Select correct screws, nesting spacers (if necessary) and
universal washers from the hardware bag (A-N) and attach
brackets (EE) to back of screen. (See Figure 8)
IMPORTANT ! :
The M8 screws do
NOT
require a
washer. Use the universal washer (N) only with M4, M5
and M6 screws.
NOTE:
The nesting spacers (M) may be used separately, or
put two together in different configurations to create
different size spacers. (See Figure 9)
Figure 9
Attaching Display to Ceiling Mount
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! The displays MUST
be located equal distance from the column on each end of
the ceiling mount.
1.
Ensure that the latch mechanisms on interface brackets
(EE) are already lowered. (See Figure 7)
2.
While supporting both sides of display, lower display onto
one side of ceiling mount, hooking top of interface brackets
onto front of ceiling mount. (See Figure 10)
3.
Raise the latch mechanism on both interface brackets to
lock bracket in place. (See Figure 10)
Figure 10
Center of
bracket
(N)
(M)
(A-K)
(EE)
3
2
(Single)
(Nested)
(Stacked)
0.375
[9.5]
0.563
[14.3]
0.750
[19.1]
2
3
3
Latch
mechanism