FCA810V/VE
Installation Instructions
14
Installing to FCA623 Accessory
NOTE:
Steps 6-10 only apply if installing to FCA623
accessory.
6.
Use two 1/4-20 x 7/16” button head cap screws (T), two
large washers (P) and two 3/5” spacers (U) to secure
support bracket (C) to main bracket (B). (See Figure 27)
7.
Slide main bracket (B) onto front of cart mount head
assembly until support bracket (C) rests on top of head
assembly. (See Figure 27)
Figure 27
8.
Slide second support bracket (C) underneath cart mount
head assembly, lining up holes on support bracket (C) to
holes on main bracket (B). (See Figure 28)
9.
Slide two 3/5” spacers (U) in between support bracket (C)
and main bracket (B). (See Figure 28)
10. Use two 1/4-20 x 7/16” button head cap screws (T) and two
large washers (P) to secure support bracket (C) to main
bracket (B). (See Figure 28)
Figure 28
NOTE:
Refer to Table 4 and dimension drawings on pages 3-
4 to determine the extension level based on extension
distance from mount center.
Table 4: Above Cart/Ceiling
11. (For
maximum extension
) Use two #10-24 lock nuts (J) to
secure upright bracket (A) to main bracket (B) and adapter
plate (V). (See Figure 29)
12. (For
maximum extension)
Use #10-32 x 3/8" button head
cap screw (S) and small spacer (K) to secure upright
bracket (A) to adapter plate (V). (See Figure 29)
Figure 29
13. (For
Intermediate extension
) Use 1/4-20 x 5/8" hex head
flange bolt (M) and center washer (H) to secure upright
bracket (A) to main bracket (B). (See Figure 30)
14. (For
Intermediate extension
) Use two #10-24 lock nuts (J)
to secure upright bracket (A) to main bracket (B) and
adapter plate (V). (See Figure 30)
Figure 30
(T) x 2
(P) x 2
6
(B)
7
(Above cart with FCA accessory)
(C)
(rear view)
(U) x 2
(T) x 2
10
(P) x 2
(C)
8
(B)
(Above cart with
(rear view)
FCA623 accessory)
(U) x 2
9
Extension distance from center of mount (in.)
16.4-19.8
Minimum
19.8-29.4
Intermediate
29.4-30.8
Maximum
(S)
12
(B)
(A)
(J) x 2
11
(Above cart/ceiling
(V)
(rear view)
- maximum)
(K)
13
(M)
(H)
(J) x 2
14
(V)
(Above Cart/Ceiling -
intermediate)
(rear view)
additional
holes for
intermediate
configuration
(A)
(B)
