FCA810V/VE
Installation Instructions
12
3.
(Standard to wall)
Use two 1/4-20 x 1/2” button head cap
screws (L), two large washers (P) and one 1/4-20 x 1/4"
button head cap screw (R) to secure camera mount (F) to
upright bracket (A). (See Figure 19)
Figure 19
NOTE:
If camera must be offset to one side or the other, attach
camera mount to upright bracket as shown in Steps 4
and 5.
4.
(Offset)
Use two 1/4-20 x 1/2” button head cap screws (L)
and two large washers (P) to secure horizontal bracket (G)
to upright bracket (A). (See Figure 20)
5.
(Offset)
Use two #10-24 lock nuts (J), two small washers
(K) and two round head carriage bolts (E) to secure camera
mount (F) to horizontal bracket (G). (See Figure 20)
Figure 20
Attaching Accessory to Wall Mount
1.
Use two 1/4-20 x 1/4” button head cap screws (R) and two
large washers (P) to secure support bracket (C) to main
bracket (B). (See Figure 21)
CAUTION:
Slide bracket with caution so that the bracket
does not scratch or damage the wall!
2.
Slide main bracket (B) behind wall mount rails until support
bracket (C) rests on top wall mount rail. (See Figure 21)
Figure 21
3.
Slide second support bracket (C) underneath lower rail on
wall mount, lining up holes on support bracket (C) to holes
on main bracket (B). (See Figure 22)
4.
Use two 1/4-20 x 1/4” button head cap screws (R) and two
large washers (P) to secure support bracket (C) to main
bracket (B). (See Figure 22)
Figure 22
(L) x 2
3
3
(P) x 2
(F)
(A)
(Standard - to Wall)
(R)
3
(L) x 2
4
(P) x 2
(F)
(A)
(E) x 2
5
(J) x 2
(K) x 2
(Offset - to Cart/Ceiling)
(Offset - to Wall)
(L) x 2
4
(P) x 2
(F)
(A)
(E) x 2
5
(J) x 2
(K) x 2
(G)
(G)
2
wall mount rails
(R) x 2
1
(P) x 2
(C)
(B)
(Above wall - all)
3
(R) x 2
4
(P) x 2
(C)
(B)
(Above wall - all)
