Installation Instructions
FCA810V/VE
13
NOTE:
Refer to Table 3 and dimension drawings on pages 3-
4 to determine the extension level based on extension
distance from mount center.
Table 3: Above Wall Mount
5.
(For
maximum extension
) Use #10-32 x 3/8” button head
cap screw (S) and small washer (K) to secure adapter plate
(V) to main bracket (B). (See Figure 23)
6.
(For
maximum extension
) Use two #10-24 lock nuts (J) to
secure upright bracket (A) to main bracket (B) and adapter
plate (V). (See Figure 23)
Figure 23
7.
(For
minimum/intermediate extension
) Use two #10-24
lock nuts (J) to secure upright bracket (A) to main bracket
(B) and adapter plate (V). (See Figure 24)
8.
(For
minimum/intermediate extension)
Use 1/4-20 x 5/8”
hex head flange bolt (M) and center washer (H) to secure
upright bracket (A) to main bracket (B). (See Figure 24)
NOTE:
Minimum configuration is shown below. Several
intermediate configurations are possible depending on
which holes are used.
Figure 24
Attaching Accessory to Cart/Ceiling Mount
IMPORTANT ! :
If installing to a 2x1 display cart using
the FCA623 accessory, proceed to “Installing to FCA623
Accessory” Section (Step 6).
1.
Use two 1/4-20 x 1/4” button head cap screws (R) and two
large washers (P) to secure support bracket (C) to main
bracket (B). (See Figure 25)
2.
Slide main bracket (B) onto front of cart/ceiling mount head
assembly until support bracket (C) rests on top of head
assembly. (See Figure 25)
Figure 25
3.
Slide second support bracket (C) underneath cart/ceiling
mount head assembly, lining up holes on support bracket
(C) to holes on main bracket (B). (See Figure 26)
4.
Use two 1/4-20 x 1/4” button head cap screws (R) and two
large washers (P) to secure support bracket (C) to main
bracket (B). (See Figure 26)
Figure 26
5.
Proceed to Step 11.
Extension distance from center of mount (in.)
16.1-19.5
Minimum
19.5 - 27.7
Intermediate
27.7-29.1
Maximum
(V)
(K)
(A)
(B)
(J) x 2
6
(S)
(Above wall -
5
maximum)
(J) x 2
7
(V)
(H)
(A)
(B)
(M)
8
(Above wall - minimum)
holes to use
for intermediate
configurations
(R) x 2
(P) x 2
1
(B)
2
(Above cart/ceiling - Standard)
(C)
(rear view)
(R) x 2
4
(P) x 2
(C)
3
(B)
(Above cart/ceiling - Standard)
(rear view)
