Installation Instructions
FCA810V/VE
11
NOTE:
For minimum extension on the FCA810VE model, the
extender box holder (D) may be installed as part of the
installation of the camera mount to the main bracket.
Skip Step 16 if mounting the FCA810VE to minimum
extension and installing the extender box holder (D).
15. (For
minimum extension)
Slide upright bracket (A) behind
main bracket (B). (See Figure 15)
16. (For
minimum extension - 810V or VE)
Use 1/4-20 x 5/8"
hex head flange bolt (M) and center washer (H) to secure
upright bracket (A) to main bracket (B). (See Figure 15)
Figure 15
17. (For
minimum extension - 810VE only)
Use 1/4-20 x
1 1/2" button head cap screw (Q) and 1/4-20 hex nut (N) and
large washer (P) to extender box holder (D) and upright
bracket (A) to main bracket (B). (See Figure 16)
18. (For
minimum extension - 810VE only)
Tighten 1/4-20
hex nut (N) to fully secure upright bracket (A) to main
bracket (B). (See Figure 16)
Figure 16
Above Installation
Assembling Camera Mount to Upright Bracket
1.
Attach camera housing (Z) to camera mount (F) using two
#8-32 x 3/8” Phillips flat head machine screws (AA). (See
Figure 17)
IMPORTANT ! :
Make sure straight slot on camera
housing is pointing in the proper direction. (See Figure
17)
Figure 17
2.
(Standard to cart/ceiling)
Use three 1/4-20 x 1/2” button
head cap screws (L) and two large washers (P) to secure
camera mount (F) to upright bracket (A). (See Figure 18)
Figure 18
(
15
16
(M)
(H)
(A)
(B)
(rear view)
(Below Cart/Ceiling Minimum
- 810V or 810VE)
(Q)
17
15
(rear view)
(Below Cart/Ceiling Minimum
(A)
(D)
(N)
(P)
18
(B)
- 810VE only)
(AA) x 2
(Z)
(F)
1
straight slot
(L) x 3
2
2
(P) x 2
(F)
(A)
(Standard - to Cart/Ceiling)
