BEFORE USE ....
Thank you for choosing M-System. Before use, please check
contents of the package you received as outlined below.
If you have any problems or questions with the product,
please contact M-System's Sales Office or representatives.
■
PACKAGE INCLUDES:
MB-01
Mounting block body .......................................................(1)
Gasket ..............................................................................(1)
Closing panel ...................................................................(1)
Screws to attach the closing panel (M4 × 12) ................(2)
NPT fitting (option /P7 only) ...........................................(1)
Screws
Pan head screw (M4 × 60) ...........................................(2)
Plain washer for M4 ....................................................(2)
Spring washer for M4 ..................................................(2)
Nut for M4 ....................................................................(2)
MB-P1
Mounting block body .......................................................(1)
Gasket ..............................................................................(1)
Closing panel ...................................................................(1)
Screws to attach the closing panel (M4 × 12) ................(2)
NPT fitting (option /P7 only) ...........................................(1)
Screws
Pan head screw (M4 × 40) ...........................................(2)
Spring washer for M4 ..................................................(2)
Nut for M4 ....................................................................(2)
MB-08
Mounting block body .......................................................(1)
Gasket ..............................................................................(8)
Closing panel ...................................................................(8)
Screws to attach the closing panel (M4 × 12) ..............(16)
NPT fitting (option /P83 only) .........................................(1)
Screws
Pan head screw (M5 × 40) ...........................................(4)
Plain washer for M5 ....................................................(8)
Spring washer for M5 ..................................................(4)
Nut for M5 ....................................................................(4)
MB-16
Mounting block body .......................................................(1)
Gasket ............................................................................(16)
Closing panel .................................................................(16)
Screws to attach the closing panel (M4 × 12) ..............(32)
NPT fitting (option /P83 only) .........................................(2)
Screws
Pan head screw (M5 × 40) ...........................................(4)
Plain washer for M5 ....................................................(8)
Spring washer for M5 ..................................................(4)
Nut for M5 ....................................................................(4)
Note: The gasket and the closing panel are already attached
to the Mounting Block when one is shipped from the
factory. The NPT fitting is also attached to it when the
option is specified when ordering.
■
MODEL NO.
Confirm Model No. marking on the product to be exactly
what you ordered.
■
INSTRUCTION MANUAL
This manual describes necessary points of caution when
you use this product, including installation, connection and
basic maintenance procedures.
MOUNTING BLOCK
MODEL
MB
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-3430 Rev.2 P. 1 / 5
INSTRUCTION MANUAL
