CHIEF AN1 Series, Installation Instructions Manual, Page: 11 / 16

Installation Instructions AN1 Series
11
Projector Adjustments
Yaw Adjustment
1. Loosen yaw adjustment locking screw using a #2 Phillips
screwdriver. (See Figure 13)
2. Turn yaw micro-adjustment screw right or left using a #2
Phillips screwdriver until image is properly aligned on target.
3. Tighten yaw adjustment locking screw using a #2 Phillips
screwdriver. (See Figure 13)
Figure 13
Pitch Adjustment
1. Loosen pitch adjustment locking screw using a #2 Phillips
screwdriver. (See Figure 14)
2. Turn pitch micro-adjustment screw right or left using a #2
Phillips screwdriver until image is properly aligned on target.
3. Tighten pitch adjustment locking screw using a #2 Phillips
screwdriver.
Figure 14
Roll Adjustment
1. Loosen roll adjustment locking screw using a #2 Phillips
screwdriver. (See Figure 15)
2. Turn roll micro-adjustment screw right or left using a #2
Phillips screwdriver until image is properly aligned on target.
3. Tighten roll adjustment locking screw using a #2 Phillips
screwdriver.
Figure 15
1
3
2
1 3
2
1
3
2