TIL1X2AA / TIL1X3AA / TIL1X4AA / TILVABAA
Installation Instructions
8
11. Using a level on the front of the mount in various places, use
a 1" socket and T-handle driver to adjust the leveling feet on
the mount until the mount is plumb. (See Figure 11)
CAUTION:
Over-torquing may cause damage. Do NOT
use a drill to make the depth adjustment.
Figure 11
12. Install one 8-32 x 1/2" Phillips tapping screw (C) into left
upper LED mounting button hole for each LED screen
space. (See Figure 12)
Figure 12
IMPORTANT ! :
The tapping screws keep the LED
modules centered on the mount, and are ONLY installed
on the furthest left column of mounts.
NOTE:
Using a drill driver makes installation of the tapping
screws (C) easier.
Leveling feet
locations
11
Model
Fastener
Qty
TIL1X4AA
4
TIL1X3AA
3
TIL1X2AA
2
[TIL1X2AA shown as example]
12
(C)