Chicco BebeCare oasys i-Size, Manual

Page: 29 / 270

28 29
seat (this pressure test should be complete
without the baby in the car seat) to check that
Chicco BebèCare is functioning.
f) Enter the information about the baby
After associating the car seat with the family
account, enter the name and date of birth of
the child. You can also enter a photograph.
Artsana does not guarantee equipment operation
in conditions other than those indicated above,
or in the case of improper use (including, but not
limited to, use with minors who are not correctly
secured to the car seat, if used with animals, etc.).
3.2 HOW CHICCO BEBÈCARE FUNCTIONS
The system is activated/connected after a few
seconds from the moment the baby is placed
in the car seat and signals the presence of the
baby in the car seat via the APP. The activation/
connection time varies based on the specific
characteristics of the smartphone; in some
cases, a few dozen seconds may be necessary.
The alarm system is activated the moment
that the smartphone that is connected to the
car seat moves away from the car in which the
car seat is installed with the baby in the car.
Chicco BebèCare has two alarm levels:
1. First level alarm: if the smartphone moves
away from the car in which the car seat is
installed with the baby in the car, an acoustic
and visual alarm will appear on the smart-
phone that can be silenced within 40 sec-
onds. If the smartphone moves towards close
to the car seat, this will not stop the alarm,
and it will be necessary to interact with the
APP by pressing the “STOP” button.
2. Second level alarm: this is activated the mo-
ment in which the first level alarm was not
silenced within the time window provided
for the first level alarm, and sends an alarm
messages to all the predefined emergency
numbers with the information needed for ge-
olocating the area where the baby is located.
The Chicco BebèCare app comes with a pack-
age of “alarm messages” that will decrease
with every second-level alarm message by a
number equal to that of the emergency con-
tacts entered. Alarm messages can be bought
through the Chicco BebèCare app.
In the event of insufficient residual alarm
messages, it is necessary to proceed with the
purchase of one of the packages available in
the dedicated “Purchases” section of the app.
If an insufficient number of alarm messages
is available, the system is disabled and will
not operate.
If there is no signal, Chicco BebèCare will cor-
rectly activate the first level alarm, however it
is not able to send the alarm messages to the
emergency numbers (second level alarm).
3.3 USING THE CHICCO BEBÈCARE APP
ON MULTIPLE DEVICES
After registering the family account and as-
sociating the car seat with Chicco BebèCare
using the smartphone by scanning the QR
code, it is possible to use Chicco BebèCare also
with other smartphones that have the Chicco
BebèCare APP installed. It is possible to use the
same family account with an unlimited number
of devices that have previously installed the
Chicco BebèCare APP.
The settings predefined using the first smart-
phone (emergency numbers, association of the
car seat and the child’s data) will be automati-
cally available also on the other smartphones
with the Chicco BebèCare APP and that are
using the same family account.
IMPORTANT: if the family password is changed,
the new password must be shared with all the
users who use the same family account.
IMPORTANT: if there are two smartphones in
the same car that were previously associated
with the car seat and both have the Chicco
BebèCare APP active, the car seat will connect
with ONLY one of the two based on the reac-
tivity of the Bluetooth® system of the individual
smartphones and this condition cannot be
changed until the baby is removed from the
car seat or until the Bluetooth® signal is lost.
If the person with the smartphone that is con-
nected with the car seat at that moment moves
away from the car with the baby in the car seat:
• the first level alarm will activate on the smart-
phone, which can be silenced by interacting
with the APP and pressing the “STOP” button.
This prevents the alarm messages from being