background image

SKU 99630 

For technical questions, please call 1-800-444-3353. 

Page 2

saVE THIs manual

Keep this manual for the safety warn-

ings and precautions, assembly, operat-

ing, inspection, maintenance and cleaning 

procedures.  Write the product’s serial 

number in the back of the manual near the 

assembly diagram (or month and year of 

purchase if product has no number).  Keep 

this manual and the receipt in a safe and 

dry place for future reference.

ImpORTanT saFETY 

InFORmaTIOn

In this manual, on the labeling, 

and all other information provid-

ed with this product:

  This is the safety alert 

symbol.  It is used to alert 

you to potential personal 

injury hazards.  Obey all 

safety messages that 

follow this symbol to avoid 

possible injury or death.

 

DangER indicates 

a hazardous 

situation which, if not 

avoided, will result in death or 

serious injury.
 

WaRnIng 

indicates a 

hazardous situation which, if 

not avoided, could result in 

death or serious injury.
 

CauTIOn, used 

with the safety 

alert symbol, indicates a 

hazardous situation which, if 

not avoided, could result in 

minor or moderate injury.

 

nOTICE is used to 

address practices 

not related to personal injury.
 

CauTIOn, without 

the safety alert 

symbol, is used to address 

practices not related to 

personal injury.

general Electric Hoist safety 

Warnings

 WaRnIng Read all safety 

warnings and instructions. 

Failure to follow the warnings and 

instructions may result in electric 

shock, fire and/or serious injury.  

 

save all warnings and 

instructions for future reference. 

Work area safety

Work area safety

1. 

Keep work area clean and well lit.  

a. 

Cluttered or dark areas invite acci-

dents.

Keep children and bystanders 

b. 

away while operating a power tool.  

Distractions can cause you to lose 

control.

Electrical safety

2. 

Electric Hoist plugs must match 

a. 

the outlet.  never modify the plug 

in any way.  Do not use any adapt-

er plugs with grounded 

equipment

.

  

Unmodified plugs and matching out

-

lets will reduce risk of electric shock.

avoid body contact with grounded 

b. 

surfaces such as pipes, radiators, 

ranges and refrigerators.  

There is 

an increased risk of electric shock if 

your body is grounded.

Do not expose Electric Hoist to 

c. 

rain or wet conditions.  

Water enter-

Summary of Contents for 99630












Reviews: