background image

SKU 99630 

For technical questions, please call 1-800-444-3353. 

Page 9

Troubleshooting

problem

possible Causes

likely solutions

Electric Hoist 

will not start

No power at outlet.

1. 

Cord not connected.

2. 

Check power at outlet.

1. 

Check that cord is plugged in.

2. 

Hoist begins to 

lift the load then 

stops

Load is heavier than hoist 

1. 

can handle.

Reduce the weight of the load.

1. 

Use the double cable lifting 

2. 

configuration.

Cable slips 

when trying to 

lift the load.

Cable is not properly 

1. 

connected to the spool 

(13).

Remove load from hook then unwind 

1. 

entire cable. Reattach to the Spool 

(13).

Cable is difficult 

to unwind from 

Spool (13).

Cable is not wound 

1. 

properly onto Spool (13).

See the proper cable winding 

1. 

instructions on Figure 4 page 8.

lImITED 1 YEaR / 90 DaY WaRRanTY

Harbor Freight Tools Co. makes every effort to assure that its products meet high qual-

ity and durability standards, and warrants to the original purchaser that for a period of ninety 

days from date of purchase that the engine/motor, the belts (if so equipped), and the blades 

(if so equipped) are free of defects in materials and workmanship. Harbor Freight Tools also 

warrants to the original purchaser, for a period of one year from date of purchase, that all 

other parts and components of the product are free from defects in materials and workman-

ship.  This warranty does not apply to damage due directly or indirectly, to misuse, abuse, 

negligence or accidents, repairs or alterations outside our facilities, normal wear and tear, or 

to lack of maintenance. We shall in no event be liable for death, injuries to persons or prop-

erty, or for incidental, contingent, special or consequential damages arising from the use 

of our product. Some states do not allow the exclusion or limitation of incidental or conse-

quential damages, so the above limitation of exclusion may not apply to you.  THIS WAR-

RANTY IS ExPRESSLY IN LIEU OF ALL OTHER WARRANTIES, ExPRESS OR IMPLIED, 

INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with 

transportation charges prepaid. Proof of purchase date and an explanation of the complaint 

must accompany the merchandise. If our inspection verifies the defect, we will either repair 

or replace the product at our election or we may elect to refund the purchase price if we 

cannot readily and quickly provide you with a replacement. We will return repaired prod-

ucts at our expense, but if we determine there is no defect, or that the defect resulted from 

causes not within the scope of our warranty, then you must bear the cost of returning the 

product.

This warranty gives you specific legal rights and you may also have other rights which 

vary from state to state.

3491 Mission Oaks Blvd.  •  PO Box 6009  •  Camarillo, CA 93011  •  (800) 444-3353

Summary of Contents for 99630












Reviews: