Page 2
For technical questions, please call 1-800-444-3353.
SKU 47423
SPEcIFIcATIONS TABLE
Overall Dim.
96” L x 48-9/16” w x 15-7/8” h
front Panel Dim. 48-9/16” w x 15-7/8” h x 2” T
Rear Panel Dim. 44-5/8” L x 15-7/8” h x 2” T
Side Panel Dim. 96” L x 15-7/8” h x 2” T
Rear Panel Latch Swing Over, Cam Slotted
weight
92 Pounds
SAVE THIS MANUAL
You will need this manual for the
safety warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual.
write the invoice number on the inside of the
front cover. Keep this manual and invoice in a
safe and dry place for future reference.
gENERAL SAFETY WARNINgS
AND PREcAUTIONS
KEEP WORK AREA cLEAN AND DRY.
1.
Cluttered, damp, or wet work areas invite
injuries.
KEEP cHILDREN AWAY FROM WORK
2.
AREA.
Do not allow children to handle
this product.
STORE IDLE EQUIPMENT.
3.
when not
in use, tools and equipment should be
stored in a dry location to inhibit rust.
Always lock up tools and equipment, and
keep out of reach of children.
DO NOT USE THIS PRODUcT
4.
IF UNDER THE INFLUENcE OF
ALcOHOL OR DRUgS.
Read warning
labels on prescriptions to determine if
your judgement or reflexes are impaired
while taking drugs. If there is any doubt,
do not attempt to use this product.
USE EYE AND HAND PROTEcTION.
5.
wear ANSI-approved safety impact
goggles and heavy-duty work gloves
when using this product. ANSI-approved
safety impact goggles and heavy-duty
work gloves are available from harbor
freight Tools.
DRESS SAFELY.
6.
Do not wear loose
clothing or jewelry, as they can become
caught in moving parts. wear a
protective hair covering to prevent long
hair from becoming caught in moving
parts. If wearing a long-sleeve shirt, roll
sleeves up above elbows.
DO NOT OVERREAcH.
7.
Keep proper
footing and balance at all times to
prevent tripping, falling, back injury,
etcetera.
INDUSTRIAL APPLIcATIONS MUST
8.
FOLLOW OSHA REQUIREMENTS.
STAY ALERT.
9.
watch what you are
doing at all times. Use common sense.
Do not use this product when you are
tired or distracted from the job at hand.
cHEcK FOR DAMAgED PARTS.
10.
Before using this product, carefully
check that it will operate properly and
perform its intended function. Check for
damaged parts and any other conditions
that may affect the operation of this
product. Replace or repair damaged or
worn parts immediately.
REPLAcEMENT PARTS AND
11.
AccESSORIES:
when servicing, use
only identical replacement parts. Only
use accessories intended for use with
this product. Approved accessories are
available from harbor freight Tools.
MAINTAIN THIS PRODUcT WITH
12.
cARE.
Keep this product clean and dry
for better and safer performance.
MAINTENANcE:
13.
for your safety,
service and maintenance should be
REV 03f
