Page 7
For technical questions, please call 1-800-444-3353.
SKU 47423
To Attach And Remove The Rear Panel:
REAR PANEL (3)
LATCh (4)
(UNLOCKED
POSITION)
LATCh (4)
(LOCKED
POSITION)
SIDE
PANEL (2)
SIDE
PANEL 2)
EXTENDING ROD
EXTENDING ROD
ROD CLAMP
ROD CLAMP
TRAILER fRAME (REAR)
FIgURE D
1. The Rear Panel (3) is removable for loading and unloading.
(See Figure D.)
To attach the Rear Panel (3) to the Steel Side Panel Kit, hold the Rear Panel with both
2.
hands and insert the Extending Rods at the bottom of the Rear Panel into the Rod
Clamps. Then, turn the Latch (4) on each rear end of the Side Panels (2) to their
locked
position.
(See Figure D.)
To temporarily remove the Rear Panel (3), turn the Latch (4) on each rear end of the Side
3.
Panels (2) to their
unlocked
position and pull the Extending Rods of the Rear Panel up
and out of the Rod Clamps.
(See Figure D.)
INSPEcTION, MAINTENANcE, AND cLEANINg
BEFORE EAcH USE,
1.
inspect the general condition of the Steel Side Panel Kit. Check
for loose mounting bolts, misalignment or binding of moving parts, cracked, bent, or
broken parts and any other condition that may affect its safe operation. Importantly,
check the Steel Side Panel Kit regularly to assure the welds remain solid. If abnormal
noise or vibration occurs, have the problem corrected before further use.
Do not use
damaged equipment.
TO cLEAN,
2.
use only water and a mild detergent.
REV 03f
