manualshive.com logo in svg

Chicago Pneumatic QRS 10, Instruction Book, Page: 53 / 86

Share
Download
Chicago Pneumatic QRS 10 Instruction Book Download Page 53

Factory standard connection is 230 V and can be changed to 208 V or 460 V.

Terminal bridges (1) can be removed using a pair of pliers.

Additional terminal bridges are provided with the compressor.

Voltage stickers:

Locate the yellow voltage labels provided with the compressor.

Replace the existing label with the appropriate voltage label (208 V, 230 V or 460 V).

4.4

Pictographs

Ref.

Description

1

Working pressure

2

Hour meter

3

Dew point temperature

4

Start

5

Stop

6

Warning: voltage

7

Lightly oil gasket of oil filter, screw filter on and tighten by hand

9

Warning: switch off voltage and depressurise compressor before carrying out
maintenance work

10

Warning: hot parts

11

With all bodywork panels in place, push the start button.

• If the sheet is pulled downwards:

• Stop the compressor immediately and switch off the voltage.
• Reverse two incoming electric lines and repeat the previous step.

• If the sheet is blown away, the motor rotation direction is correct.

Instruction book

2920 7114 70

51

Summary of Contents for QRS 10























































































Reviews:

No comments