page 3
SPECIFIC SAFETY RULES - IMPACT WRENCH
1.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
2.
Maintain labels and nameplates.
These carry important information. If unreadable or missing, contact a
MILWAUKEE service facility for a free
replacement.
3.
WARNING!
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•
lead from lead-based paint
•
crystalline silica from bricks and cement and other masonry products, and
•
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
Double Insulated
Symbology
Volts Alternating Current/
Direct Current
Impacts per Minute Under Load
(IPM)
Amps
Canadian Standards Association
Underwriters Laboratories, Inc.
NEW PHOTO
NEEDED
1.
Drive shank
2.
Rocker switch
3.
Cord
FUNCTIONAL DESCRIPTION
Impacts Per
Minute
2600
Catalog
No.
CP8750
Average
Torque
Output
300 ft-lbs.
Volts
120 AC/DC
Specifications
Amps
7
Drive
Shank
1/2"
No Load
RPM
1800
3
2
1
