Chicago Pneumatic CP7600xC Series, Operator'S Manual

Page: 7 / 180

The angle gear and clutch must be lubricated using grease that
contains molybdenum disulphide: Molykote BR2 Plus, for ex-
ample, or an equivalent brand.
Use lubricants of good quality. The oils and greases mentioned
in the table are examples of lubricants which are recommended.
Rust protection and internal cleaning
Water in the compressed air, dust and wear particles cause rust
and sticking of vanes, valves etc. An air filter should be installed
close to the machine (see “Air quality”).
Service instructions
Overhaul and preventive maintenance is recommended at regular
intervals once per year or after maximum 250.000 tightening de-
pending on which occurs sooner. More frequent overhaul may be
needed, if used at high torque and long tightening times. If the
machine not is working properly, it should immediately be taken
away for inspection.
The strainer at the air inlet and the exhaust silencer should be
cleaned frequently or replaced in order to prevent clogging, which
decreases the capacity.
At the overhauls, all parts should be cleaned accurately and de-
fective or worn parts (i.e. O-rings, vanes) should be replaced.
Disassembling/assembling
It is important that the machines threaded connections are tightened
properly; i.e. in accordance with the specifications on the exploded
views.
A
Lubricate o-rings and threaded connections with grease before
assembling.
Cleaning
Clean all parts thoroughly in white spirit or similar cleaning agent.
To prevent clogging and decreased power, it could be necessary
to clean the strainer (if used) and the exhaust filter between the
overhauls.
Inspection
After the cleaning, inspect all parts. Damaged and worn parts
should be replaced.
Lubrication
Lubricate specially gears, valve and clutch with grease containing
molybdenum disulphide (e.g. Molykote BR2 Plus). Please see
exploded views and fig. under Service instructions.
Grease guide Nutrunners
Free wheel
Free wheel
unit (gear rim
and gear
wheels)
Bearings (gen-
eral purpose) Brand
Energrease LS-
EP2 Energrease LS-
EP2 BP
Spheerol EP L2 Castrol
Beacon EP2 Beacon EP2 Esso
Rembrandt
EP2 Rembrandt
EP2 Q8
Mobilegrease
XHP 222 Mobil
Alvania EP2 Alvania EP2 Shell
Multifak EP2 Texaco
Molycote
Suntemp LE
9102 Lubricating
Oil treatment STP
Air lubrication Gears Brand
Energol E46 Bp
Castro
AroxEP46 Esso
Chopin 46 Q8
Almo oil 525 Mobil
Torcula 32 Shell
Aries 32 Texaco
BR2 Plus Molycote
8940164682 Part no
EN
1
1 Issue no
Series no
2010-01 Date
7 Page