Chicago Pneumatic CP 4608 D, Safety And Operating Instructions Manual, Page: 16 / 248

inserted tool will cause damage to the impact
mechanism.
CP 4608 P, CP 4611 P
Start the machine by squeezing the trigger while
firmly holding the handle.
Stop the machine by releasing the trigger. The
trigger returns automatically to the stop position.
CP 4608 D, CP 4611 D
Start the machine by squeezing the trigger while
firmly holding the handle.
Stop the machine by releasing the trigger. The
trigger returns automatically to the stop position.
Operating
Starting a cut
♦
Stand in a stable position with your feet well away
from the inserted tool.
♦
Press the machine against the working surface
before you start.
♦ Start collaring at such a distance from the edge
that the machine is capable of breaking the
material without levering.
♦
Never try to break off too large pieces. Adjust the
breaking distance (A) so that the inserted tool
does not get stuck.
Breaking
♦ Let the machine do the work; do not press too
hard.
♦ Avoid working in extremely hard materials for
example granite and reinforcing iron (re-bar)
which would cause substantial vibrations.
♦
Any form of idling, operating without insertion
tool or operating with an uplifted machine must
be avoided.
♦
When the machine is lifted, the start and stop
device must not be activated.
♦ Check regularly that the machine is well
lubricated.
9800 0551 90b | Original instructions 16
CP 4608 P, CP 4611 P, CP 4608 D, CP 4611 D Safety and operating instructions