SKU 97580
For technical questions, please call 1-800-444-3353.
Page 9
speciFicAtions
Electrical
Requirements
120 V~ / 60 Hz/9.5 A
Motor No Load Speed 0-2500 RPM
Maximum Cut Depth
6 inches
Length of Stroke
1-1/8 inch
Blade Fastening
System
Twist Ring Quick
Release Chuck for 1/2”
Shank Blades
Required Blade Type 1/2” Shank
Included Blades
Metal Cutting : 4-1/8”
x 5/8” x 20ga. 25 TPI
Wood Cutting: 5-11/16”
x 3/4” x 18 ga. 10TPI
Base Plate
Dimensions
3-1/2” L x 1-5/8” W
15 ga. Aluminum
Shoe Plate Tilt Range 80° x 100°
Armature Bearings
(2) Fully Shielded
Radial Bearings
Power Control
Trigger Switch with
Lock-On Button
e194601
unpAcKing
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
list of contents
part #
description
Qty
Reciprocating Saw
1
43
Wood Cutting Blade
1
43
Metal Cutting Blade
1
67
Allen Key
1
Owner’s Manual
1
instRuctions FoR
putting into use
Read the entiRe impoRtAnt
sAFetY inFoRmAtion
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
to pReVent
seRious injuRY
FRom AccidentAl
opeRAtion:
turn the power switch of the tool
to its “oFF” position and unplug
the tool from its electrical outlet
before assembling or making
any adjustments to the tool.
note:
For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
Assembly: installing the Blade
Be sure the tool is unplugged from its
1.
power source. Wear heavy duty work
gloves.
Chuck (8)
Shoe Plate (44)
Set Screws (38)
