background image

SKU 97580 

For technical questions, please call 1-800-444-3353. 

Page 5

parts can grab the surface and pull 

the tool out of your control.
When using a handheld power tool, 

6. 

maintain a firm grip on the tool with 

both hands to resist starting torque.
Do not leave the tool unattended 

7. 

when it is plugged into an electrical 

outlet.  Turn off the tool, and unplug 

it from its electrical outlet before 

leaving.
This product is not a toy.  Keep it out 

8. 

of reach of children.
People with pacemakers should 

9. 

consult their physician(s) before 

use.  Electromagnetic fields in close 

proximity to heart pacemaker could 

cause pacemaker interference or 

pacemaker failure.  In addition, 

people with pacemakers should: 

• Avoid operating alone.

 

• Do not use with power switch locked 

on. 

• Properly maintain and inspect to 

avoid electrical shock. 

• Any power cord must be properly 

grounded.  Ground Fault Circuit 

Interrupter (GFCI) should also be 

implemented – it prevents sustained 

electrical shock.
Some dust created by power 

10. 

sanding, sawing, grinding, drilling, 

and other construction activities, 

contains chemicals known [to the 

State of California] to cause cancer, 

birth defects or other reproductive 

harm.  Some examples of these 

chemicals are: 

• Lead from lead-based paints

 

• Crystalline silica from bricks and 

cement or other masonry products 

• Arsenic and chromium from 

chemically treated lumber 

Your risk from these exposures 

varies, depending on how often you 

do this type of work.  To reduce your 

exposure to these chemicals: work in 

a well ventilated area, and work with 

approved safety equipment, such as 

those dust masks that are specially 

designed to filter out microscopic 

particles.  (California Health & Safety 

Code § 25249.5, 

et seq.

)

WARNING: Handling the cord on 

11. 

this product will expose you to lead, 

a chemical known to the State of 

California to cause cancer, and 

birth defects or other reproductive 

harm. Wash hands after handling.  

(California Health & Safety Code §  

25249.5, et seq.)
The warnings, precautions, 

12. 

and instructions discussed in 

this instruction manual cannot 

cover all possible conditions and 

situations that may occur.  It must 

be understood by the operator that 

common sense and caution are 

factors which cannot be built into this 

product, but must be supplied by the 

operator.

Vibration safety

This tool vibrates during use.  

Repeated or long-term exposure to 

vibration may cause temporary or 

permanent physical injury, particularly 

to the hands, arms and shoulders.  To 

reduce the risk of vibration-related 

injury:
Anyone using vibrating tools regularly 

1. 

or for an extended period should 

first be examined by a doctor and 

then have regular medical check-

ups to ensure medical problems are 

Summary of Contents for 97580



































Reviews: