SKU 66133
For technical questions, please call 1-800-444-3353.
Page 4
preventive safety measures reduce
the risk of starting the power tool ac
-
cidentally.
Store idle power tools out of the
d.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool.
Power tools are
dangerous in the hands of untrained
users.
maintain power tools. Check for
e.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If dam-
aged, have the power tool repaired
before use.
Many accidents are
caused by poorly maintained power
tools.
Keep cutting tools sharp and
f.
clean.
Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
use the power tool and its acces-
g.
sories in accordance with these
instructions, taking into account
the working conditions and the
work to be performed.
Use of the
power tool for operations different
from those intended could result in a
hazardous situation.
Service
5.
Have your power tool serviced by
a.
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Specific Safety Warnings
Do not operate this Leaf Eater/Shred-
1.
der without all safety guards in place
and properly operating.
Switch Leaf Eater/Shredder on BE-
2.
FORE placing leaves into Funnel (1).
This tool is designed to process
3.
ONLY leaves and light vegetation.
Do not feed twigs, branches, roots,
metal, stones, bottles, cans, or other
foreign objects into the tool.
If foreign objects are detected or the
4.
cutting mechanism strikes a foreign
object or if the Leaf Eater/Shredder
makes an unusual noise or vibration,
immediately turn OFF the tool. Wait
until the Leaf Eater/Shredder comes
to a complete stop. Disconnect the
Power Cord (37), and take the follow-
ing steps:
a. Remove any foreign or clogged
material.
b. Check for any loose parts and
tighten.
c. Replace or repair damaged parts.
Use only
5.
0.080”
diameter monofila
-
ment cords no longer than 12-3/4”
with this Leaf Eater/Shredder.
Shred load completely and allow mo-
6.
tor to regain speed BEFORE insert-
ing next load into Funnel.
Do NOT pack leaves down after plac-
7.
ing them in Funnel.
Do not overload Shredder; this can
8.
lead to motor failure and possibly
damage.
Never place your hands or any part of
9.
your body or clothing inside the Up-
REV 09i
