SKU 66133
For technical questions, please call 1-800-444-3353.
Page 15
TROubLESHOOTIng
problem
possible Causes
possible Solutions
Tool will not start
No power at outlet.
1.
Cord not connected.
2.
Circuit breaker has tripped.
3.
Check power at outlet.
1.
Check that cord is plugged in.
2.
Clean filter and debris inside housing. Then
3.
restart.
No cutting action.
Cutting cord is worn, or
1.
excessive debris is built up
inside housing.
Replace cutting cord with new cord.
1.
Clean out built up debris in housing.
2.
Motor sounds as
if it is not running
properly.
Circuit breaker
trips.
Air filter is dirty.
1.
Unit is clogged with debris.
2.
Remove and clean air filter.
1.
Clean out all debris from unit.
2.
Follow all safety precautions whenever diagnosing or servicing the
tool. Disconnect power supply before service.
Record product’s Serial number Here:
note:
If product has no serial number, record month and year of purchase instead.
note:
Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.
REV 09i
