manualshive.com logo in svg

Chicago Electric 62216, Owner'S Manual And Safety Instructions

Share
Download
Chicago Electric 62216 Owner'S Manual And Safety Instructions Download Page 9

Page 9

For technical questions, please call 1-888-866-5797.

Item 62216

        

SaFety

Opera

tiOn

Maintenance

Setup

 Setup - Before use:

  read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this 

manual including all text under subheadings therein before set up or use of this product.

tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn:

Make sure that the power Switch is in the off-position and unplug the tool from 

its electrical outlet  before performing any procedure in this section.

note:

 For additional information regarding the parts listed in the following pages, 

refer to the Assembly Diagram near the end of this manual�

assembly

1�  Slide the Dust Bag onto the back of the 

Sander�  Snap it in place using firm pressure�

2�  The collection of the dust will only work if the 

sandpaper has holes that line up with the 8 dust 

collection holes in the Backing Pad� There are 

4 other holes in the Backing Pad for the Screws 

that attach the Backing Pad to the Sander�

Functions

 

power

Switch

Dust Bag

Backing pad

power cord

Summary of Contents for 62216

















Reviews:

No comments

Brands by name

Popular brands

Load more brands