Chicago Electric 62216 Owner'S Manual And Safety Instructions Download Page 2

Page: 2 / 16

Page 2

For technical questions, please call 1-888-866-5797.

Item 62216

Fety

Opera

Maintenance

Setup

table of contents

Safety �� 2
Specifications �� 8
Setup �� 9
Operation �� 10

Maintenance �� 12
Parts List and Diagram �� 14
Warranty �� 16

WarninG SyMBOLS anD DeFinitiOnS

This is the safety alert symbol� It is used to alert you to potential

personal injury hazards� Obey all safety messages that

follow this symbol to avoid possible injury or death�

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury�

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury�

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury�

Addresses practices not related to personal injury�

iMpOrtant SaFety inFOrMatiOn

General power tool Safety Warnings

read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term ″power tool″ in the warnings refers to your mains-operated (corded) power tool.

Work area Safety

1�

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

2�

Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust.

Power tools

create sparks which may ignite the dust or fumes.

3�

Keep children and bystanders

away while operating a power tool.

Distractions can cause you to lose control.

Summary of Contents for 62216

















Search results

Summary of Contents for 62216

Reviews:

Brands by name

Popular brands

Chicago Electric 62216, Owner'S Manual And Safety Instructions

Search results

Summary of Contents for 62216

Reviews:

Brands by name

Popular brands