background image

Page 5

For technical questions, please call 1-888-866-5797.

Item 62216 

        

Sa

Fety

Opera

ti

O

n

Maintenance

Setup

Vibration Safety

This tool vibrates during use�  

Repeated or long-term exposure to vibration may 

cause temporary or permanent physical injury, 

particularly to the hands, arms and shoulders�  

To reduce the risk of vibration-related injury:

1�  Anyone using vibrating tools regularly or for 

an extended period should first be examined 

by a doctor and then have regular medical 

check-ups to ensure medical problems are not 

being caused or worsened from use�  Pregnant 

women or people who have impaired blood 

circulation to the hand, past hand injuries, 

nervous system disorders, diabetes, or 

Raynaud’s Disease should not use this tool�  

If you feel any symptoms related to vibration (such 

as tingling, numbness, and white or blue fingers), 

seek medical advice as soon as possible�

2�  Do not smoke during use�  Nicotine reduces 

the blood supply to the hands and fingers, 

increasing the risk of vibration-related injury�

3�  Wear suitable gloves to reduce the 

vibration effects on the user�

4�  Use tools with the lowest vibration 

when there is a choice�

5�  Include vibration-free periods each day of work�

6�  Grip tool as lightly as possible (while still keeping 

safe control of it)�  Let the tool do the work�

7�  To reduce vibration, maintain the tool as 

explained in this manual�  If any abnormal 

vibration occurs, stop use immediately�

 SaVe tHeSe inStructiOnS.

Summary of Contents for 62216

















Reviews: