background image

Page 2

SKU 47937

For technical questions, please call 1-800-444-3353.

SPECIFICATIONS

Item

Description

Motor

1 HP, 8.5 Amps

Speed

11,500 to 28,000 RPM (no load);
Variable by rheostat

Power Consumption

110 VAC, 60 Hz, 900 Watts

Power Cord

16 AWG, 2-prong, polarized plug, UL listed

Collet Capacity

1/4 and 5/16 inch

Plunge Depth

2 inches (maximum)

Dust Chute

1-5/8 inches

Weight

7 lbs.

Insert Dimensions

2-1/4 inches

Base Dimensions

6-1/8 (dia.) inches

Overall Dimensions

12 (L) x 6-1/8 (H) x 3/4 (W) inches

SAVE THIS  MANUAL

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram.  Keep your invoice with this
manual.  Write the invoice number on the inside of the front cover.  Keep the manual and
invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instruc-
tions listed below may result in electric shock, fire, and/or serious injury.

SAVE THESE  INSTRUCTIONS

Work Area

1.

Keep your work area clean and well lit.  Cluttered benches and dark areas invite accidents.

2.

Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust
.  Power tools create sparks which may ignite the dust or
fumes.

3.

Keep bystanders, children, and visitors away while operating a power tool.

Distractions can cause you to lose control.  Protect others in the work area from debris such
as chips and sparks.  Provide barriers or shields as needed.

Electrical Safety

4.

Grounded tools must be plugged into an outlet properly installed and grounded in
accordance with all codes and ordinances.  Never remove the grounding prong or
modify the plug in any way.  Do not use any adapter plugs.  Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded. 
 If the tools
should electrically malfunction or break down, grounding provides a low resistance path to
carry electricity away from the user.

E194601

Summary of Contents for 47937
















Reviews: