Page 8
SKU 47937
For technical questions, please call 1-800-444-3353.
UNPACKING
When unpacking, check to make sure that all the parts are included. Refer to the Assembly
section, and the Assembly Drawing and Parts List at the end of this manual.
If any parts are missing or broken, please call Harbor Freight Tools at the number on the
cover of this manual as soon as possible.
SETUP AND ADJUSTMENT
Controls and Indicators
Installing Bits
Caution: Before installing accessories or bits, turn the router power Off and unplug the
line cord from the electrical outlet. Bits are sharp. Handle with care. Check the bit for
cracks or damage before using. Use only router bits. Never use a cracked or damaged
bit.
1.
Loosen the Plunger Locking Knob (35) to allow the router to raise fully.
2.
Press the Collet Lock (23) to keep the shaft stationary.
3.
Using Wrench (62), loosen the Collet Nut (27).
4.
Insert the bit all the way into the Collet.
5.
Using the Wrench, securely tighten Collet Nut while
pushing in on the Collet Lock (23).
Do not tighten the Collet Nut without inserting a bit or
Collet Cone with bit. Damage can occur.
Switch (12)
Lock On Button
Collet Lock (23)
Collet Nut (27)
Lock Knob (31)
Depth Guide
Indicator (42)
Depth Stop
Screws (52)
Handle (33)
Straight Guide
(57)
Lock Knob (44)
for plunge depth
setting
Plunger
Locking Lever
(35)
Speed Control Wheel (2)
(27)
(23)
