Thank you for puchasing this product
Product Specifications
Power Supply:
24V, 0.65A
(see back of power supply)
Coverage:
Approx. 40m
2
Power:
12W
Sound:
Includes 12 minutes of preloaded sounds
Note:
This diffuser must be used with the supplied power adapter. Please keep this
manual for reference.
Safety Precautions
•
Do not use for any purpose other than those described in this manual.
•
Before connecting to a power outlet, make sure the intended voltage meets
the product specifications indicated above.
•
Do not use if the power adapter, power plug, or diffuser unit has obvious signs
of damage and return the unit immediately.
•
This product must be used only with the supplied power adapter to avoid
damaging diffuser components.
•
Do not allow the power adapter or plug to come into contact with water or
other liquids.
•
Do not allow water or other liquids to get inside the diffuser body.
•
For long periods of unuse or storage, remove the adapter plug, empty any
remaining water, and clean the diffuser unit.
•
When unplugging the diffuser, grasp the power adaptor plug instead of the power
adaptor cable itself.
•
Keep out of reach of children.
•
Use caution when handling the glass lid.
Product Overview
Note:
Yun’s concept comes from the magical effect of the oriental Five Senses medical
treatment, being well combined with its fashion design. It helps to perceive the nature
scent from the wild vegetation which synchronizes with the gentle musical rhythm and
the soft changing light. Sinking into the Yun’s mirage helps to relax the body and mind,
balance the emotion and release the pressure. With the Hi-Tech application, this product
perfectly interprets the harmony and unification of the life and the nature.
When using the Essential oils diffuser Yun, please comply with the following safety
precautions:
Due to the mist output of the Yun Essential oils diffuser, use with caution on surfaces that
are sensitive to water and oil.
A
B
M
N
O
P
Q
R
T
U
S
C
D
E
F
G
H
I
J
K
L
A.
B.
C.
D.
E.
F.
Glass Lid
Mist Spout
Wooden Base
Infrared Receiver
Splash Guard
Maximum Water Level Indicator
H.
I.
J.
K.
L.
M.
N.
Mist Plate
Air Outlet
Air Inlet
Speaker
Audio Input
Power Inlet
Remote Control
Power Adapter Plug
Power Adapter
Water Cup
Audio Cable
Cleaning Brush
Air Outlet Accessory
O.
G.
P.
Q.
R.
S.
T.
Power Button
U.
Water Reservoir
Assembly Instructions
1. Open the diffuser package and make sure all parts are present (see page 3).
2. Check for any obvious signs of damage, particularly on the Power Adapter and
Power Adapter Plug.
3. Place the diffuser on a flat surface, out of the reach of children.
4. Connect the Power Adapter Plug “L” to the Power Inlet “K”.
5. Connect the Power Adapter “J” into an appropriate power outlet.
6. Insert the Air Outlet Accessory “U“ into the Air Outlet “E”.
7. Insert the Splash Guard “F” and align the notch.
Usage Instructions
1. Use the supplied Water Cup to add mineral or tap water.
2. Remove the Glass Lid and add water into the Water Reservoir until it reaches
the red Maximum Water Level Indicator.
3. Add several drops of your favorite essential oils into the Water Reservoir.
4. Replace the Glass Lid.
5. Turn the diffuser unit ON using the remote control and select the desired setting
(the remote control operates up to 7.6 meters from the diffuser unit). Alternatively,
press the Power Button to turn ON the diffuser and press repeatedly to cycle
through the light setting. See diagram in LED section in Remote Control Feature
for LED cycles.*
6.
If the Audio On/Off button is selected on the remote control, a selection of
soothing sounds will play and the lights will turn ON.
Remote Control Battery Installation
Remote Control Features
Use the included Remote Control to enhance your diffusing experience.
•
•
1H
Press the 1H button for 1 hours of continuous operation, after which
the diffuser unit will shut off automatically.
•
5H
Press the 5H button for 5 hours of continuous operation, after which
the diffuser unit will shut off automatically.
•
•
•
Press the button to increase sound level.
•
Volume -
Press the Volume - button to decrease sound level.
•
Battery Cover
Button Cell Battery (CR2032)
Battery Compartment
LED
Press to cycle through LED light display modes: Five soft LED light
settings (5 colors cycling, cyan, green, white, blue, purple and Power OFF)
Audio On/Off
Press the Audio On/Off button to play or stop the built-in
selection of soothing sounds.
10H
Intermittent Mode Press the 10H button for 10 hours of intermittent
operation after which the diffuser will shut off automatically.
(Intermittent mode: 5 minute ON 5 minute OFF).
Power On/Off
Press the Power On/Off button once to turn ON the device.
The mist, light and sound will turn ON simultaneously.
POWER ON/OFF
1H
AUDIO ON/OFF
VOLUME-
LED
5H
10H
1H
5H
AUDIO ON/OFF
10H
5MIN
5MIN
5 colors
Cycling
Cyan
Green
White
Blue
Purple
Light Off
Power Off
*Power Button Only
*When Power Button is pressed to turn on the diffuser, diffuser will auto shutdown until
water is used up or turns off at time settling selected by Remote Control. Or press
Power Button for 2 seconds to turn off the diffuser.
Assembly Instructions
1. Open the diffuser package and make sure all parts are present (see page 3).
2. Check for any obvious signs of damage, particularly on the Power Adapter and
Power Adapter Plug.
3. Place the diffuser on a flat surface, out of the reach of children.
4. Connect the Power Adapter Plug “L” to the Power Inlet “K”.
5. Connect the Power Adapter “J” into an appropriate power outlet.
6. Insert the Air Outlet Accessory “U“ into the Air Outlet “E”.
7. Insert the Splash Guard “F” and align the notch.
Usage Instructions
1. Use the supplied Water Cup to add mineral or tap water.
2. Remove the Glass Lid and add water into the Water Reservoir until it reaches
the red Maximum Water Level Indicator.
3. Add several drops of your favorite essential oils into the Water Reservoir.
4. Replace the Glass Lid.
5. Turn the diffuser unit ON using the remote control and select the desired setting
(the remote control operates up to 7.6 meters from the diffuser unit). Alternatively,
press the Power Button to turn ON the diffuser and press repeatedly to cycle
through the light setting. See diagram in LED section in Remote Control Feature
for LED cycles.*
6.
If the Audio On/Off button is selected on the remote control, a selection of
soothing sounds will play and the lights will turn ON.
Remote Control Battery Installation
Remote Control Features
Use the included Remote Control to enhance your diffusing experience.
•
•
1H
Press the 1H button for 1 hours of continuous operation, after which
the diffuser unit will shut off automatically.
•
5H
Press the 5H button for 5 hours of continuous operation, after which
the diffuser unit will shut off automatically.
•
•
•
Press the button to increase sound level.
•
Volume -
Press the Volume - button to decrease sound level.
•
Battery Cover
Button Cell Battery (CR2032)
Battery Compartment
LED
Press to cycle through LED light display modes: Five soft LED light
settings (5 colors cycling, cyan, green, white, blue, purple and Power OFF)
Audio On/Off
Press the Audio On/Off button to play or stop the built-in
selection of soothing sounds.
10H
Intermittent Mode Press the 10H button for 10 hours of intermittent
operation after which the diffuser will shut off automatically.
(Intermittent mode: 5 minute ON 5 minute OFF).
Power On/Off
Press the Power On/Off button once to turn ON the device.
The mist, light and sound will turn ON simultaneously.
POWER ON/OFF
1H
AUDIO ON/OFF
VOLUME-
LED
5H
10H
1H
5H
AUDIO ON/OFF
10H
5MIN
5MIN
5 colors
Cycling
Cyan
Green
White
Blue
Purple
Light Off
Power Off
*Power Button Only
*When Power Button is pressed to turn on the diffuser, diffuser will auto shutdown until
water is used up or turns off at time settling selected by Remote Control. Or press
Power Button for 2 seconds to turn off the diffuser.
Connecting an External Music Player
1. Plug one end of the Audio Cable into the
Audio Input and the other end into the
headphone jack of any external music
player (Mobile Phone, MP3, MP4, CD, or
DVD) to play your own music. The built-in
sounds will automaticlly turn OFF.
2.
To resume playing of the built-in sounds,
remove the Audio Cable.
Note: Be sure to completely remove the Audio Cable from the Audio Input, otherwise,
the built-in sounds will not play.
Cleaning and Maintenance
To drain the water in the Water Reservoir, tilt the diffuser unit
as illustrated in diagram A. Use paper towel or cloth to wipe
up any residual water.
To avoid water entering the unit and damaging diffuser
components, do not pour from the Air Outlet Accessory
side (see diagram B).
•
Before cleaning, turn the unit OFF and unplug the Power Adapter Plug.
•
If essential oil begins to build up on the Mist Plate, gently wipe it off using
the included Cleaning Brush or a cotton swab dipped in rubbing alcohol.
•
Use a cotton cloth soaked with non-toxic cleanser to clean the diffuser unit,
including the inside of the Water Reservoir. Remove any residual essential oil
stains, rinse the above-mentioned parts with water, and then dry with a cloth.
•
Clean the Water Reservoir and Mist Plate at least twice a week for best
performance.
•
If any water or essential oil accidentally lands on the wooden base,
wipe immediately to avoid fading or discoloration.
B
A
Product: Yun Essential oils diffuser
Item No.: PZ-UA040
Dimensions: (220 x 220 x156mm)
Material of Diffuser Base: Maple wood
Material of Diffuser Cover: Glass
Material of Diffuser Water Reservoir: Polypropylene
Weight:1109g
Coverage Area: Approx. 40m
2
Diffusion Run Time Settings: 1hours/5hours/10hours(intermittent)
LED Colors: 5 different soft LED color settings, cyan, green, white,
blue, purple, 5 colors cycling and off)
Remote Control Range (Infrared): Approx. 8m
Water Reservoir Capacity: 280 +/- 10ml
Ultrasonic Frequency: 1.7 million waves per second
Power Input: DC 24V 12W
Adapter: AC Adapter 100~240V 50/60Hz
Atomized Particle Diameter: 5μm
Water Type: Room-temperature tap or mineral water (Do not use purified or distilled
water)
Usage Environment: Indoor
Specifications
Note: To avoid product damage, do not use any corrosive cleaner on the components
mentioned above.
Mist Plate Replacement
Follow the diagram, remove
the original Mist Plate by
unscrewing the Gasket using
the Key provided. Replace a
new Mist Plate and press
tightly onto the Silicon ring
seal. Screw back the Gasket
with the Key to secure.
Mist Plate
Key
Gasket
Silicon Ring Seal
