Chevrolet VENTURE 2004 Owner'S Manual Download Page 54

Page: 54 / 516

Pull up on the latch plate to make sure it is secure.

When the shoulder belt is pulled out all the way,
it will lock. If it does, let it go back all the way and
start again.

If the belt is not long enough, see Safety Belt
Extender on page 1-52.

Make sure the release button on the buckle is
positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

3. To make the lap part tight, pull down on the buckle

end of the belt as you pull up on the shoulder part.

Third Row Outside Passenger Position

1-48

Summary of Contents for VENTURE 2004





































































































































































































































































































































































































































































































































Search results

Summary of Contents for VENTURE 2004

Reviews:

Related manuals for VENTURE 2004

Brands by name

Popular brands

Chevrolet VENTURE 2004, Owner'S Manual

Search results

Summary of Contents for VENTURE 2004

Reviews:

Related manuals for VENTURE 2004

Brands by name

Popular brands