Chevrolet Traverse 2014 Owner'S Manual Download Page 146 | Manualshive

Page: 146 / 438

background image

Black plate (30,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

6014422) - 2014 - crc - 8/15/13

5-30

Instruments and Controls

Blank Display

This display shows no information.

Driver Information Center
(DIC) (Without DIC
Buttons)

If your vehicle does not have DIC
buttons, the information below
explains the operation of this
system.

The DIC has different displays
which can be accessed by pressing
the trip odometer reset stem located
on the instrument panel cluster.
Pressing the trip odometer reset
stem will also turn off,
or acknowledge, DIC messages.

The DIC displays trip and vehicle
system information, and warning
messages if a system problem is
detected.

If your vehicle does not have DIC
buttons, you can use the trip
odometer reset stem to view the
following displays: odometer, trip
odometers, oil life, park assist menu

for vehicles with the Ultrasonic Rear
Parking Assist (URPA) system,
units, and display language.

If your vehicle has DIC buttons, you
can use the trip odometer reset
stem to view the following displays:
odometer and trip odometers.

Trip Odometer Reset Stem
Menu Items

ODOMETER

Press the trip odometer reset stem
until ODOMETER displays. This
display shows the distance the
vehicle has been driven in either
kilometers (km) or miles (mi).

To switch between English and
metric measurements, see

“

UNITS

”

later in this section.

TRIP A or TRIP B

Press the trip odometer reset stem
until TRIP A or TRIP B displays. This
display shows the current distance
traveled in either kilometers (km) or
miles (mi) since the last reset for

each trip odometer. Both trip
odometers can be used at the
same time.

Each trip odometer can be reset to
zero separately by pressing and
holding the trip odometer reset stem
while the desired trip odometer is
displayed.

The trip odometer has a feature
called the retroactive reset. This can
be used to set the trip odometer to
the number of kilometers (miles)
driven since the ignition was last
turned on. This can be used if the
trip odometer is not reset at the
beginning of the trip.

To use the retroactive reset feature,
press and hold the trip odometer
reset stem for at least four seconds.
The trip odometer will display the
number of kilometers (km) or
miles (mi) driven since the ignition
was last turned on and the vehicle
was moving. Once the vehicle
begins moving, the trip odometer
will accumulate mileage. For
example, if the vehicle was driven

«
...
144
145
146
147
148
...
»

Summary of Contents for Traverse 2014























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Traverse 2014

Brand: AC Schnitzer Pages: 16

Brand: Wagan Pages: 12

Brand: Warrior Products Pages: 4

Brand: Porsche Pages: 51

Brand: Whispbar Pages: 14

Brand: TrailFX Pages: 6

1973 Convertible

Brand: Volkswagen Pages: 80

Car Cup Holder Phone Mount

Brand: UGREEN Pages: 9

Code Alarm PROFESSIONAL SERIES CA 5550SST

Brand: Audiovox Pages: 14

Brand: Yakima Pages: 11

Brand: Magneti Marelli Pages: 2

Brand: E&G Classics Pages: 4

Brand: Xpresskit Pages: 18

Brand: Thule Pages: 3

Brand: Mitsubishi MOTORS Pages: 416

Hatch-bag Luggage System

Brand: Tabernus Peram Pages: 10

Brand: BrandMotion Pages: 6

Easy Air Auto Screen

Brand: Wagan Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands