Chevrolet Traverse 2014 Owner'S Manual Download Page 35 | Manualshive

Page: 35 / 438

background image

Black plate (3,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

6014422) - 2014 - crc - 8/15/13

Keys, Doors, and Windows

2-3

/

(Remote Vehicle Start):

For

vehicles with this feature, see

Remote Vehicle Start on page 2-4

.

Q

(Lock):

Press to lock all the

doors.

If enabled through the Driver
Information Center (DIC), the
parking lamps flash once to indicate
locking has occurred. If enabled
through the DIC, the horn sounds
when

Q

is pressed again within

five seconds. See

Vehicle

Personalization (With DIC Buttons)
on page 5-43

.

Pressing

Q

may arm the content

theft-deterrent system. See

Vehicle

Alarm System on page 2-12

.

K

(Unlock):

Press once to unlock

only the driver door. If

K

is pressed

again within five seconds, all
remaining doors unlock. The interior
lamps come on and stay on for
20 seconds or until the ignition is
turned on.

If enabled through the DIC, the
parking lamps flash twice to indicate
unlocking has occurred. See

Vehicle

Personalization (With DIC Buttons)
on page 5-43

.

Pressing

K

on the RKE transmitter

disarms the content theft-deterrent
system. See

Vehicle Alarm System

on page 2-12

.

8

(Power Liftgate):

Press and

hold until the liftgate begins to move
to open or close the liftgate. The
taillamps flash and a chime sounds
to indicate when the liftgate is
opening or closing.

L

(Vehicle Locator/Panic

Alarm):

Press and release to

locate the vehicle. The parking
lamps flash and the horn sounds
three times.

Press and hold

L

for more than

two seconds to activate the panic
alarm. The parking lamps flash and
the horn sounds repeatedly for
30 seconds. The alarm turns off
when the ignition is moved to ON/

RUN or

L

is pressed again. The

ignition must be in LOCK/OFF for
the panic alarm to work.

Programming Transmitters to
the Vehicle

Only RKE transmitters programmed
to this vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.
When the replacement transmitter is
programmed to this vehicle, all
remaining transmitters must also be
reprogrammed. Any lost or stolen
transmitters will no longer work
once the new transmitter is
programmed. Each vehicle can
have up to eight transmitters
programmed to it. See your dealer
to program transmitters to this
vehicle.

«
...
33
34
35
36
37
...
»

Summary of Contents for Traverse 2014























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Traverse 2014

Brand: cam Pages: 28

2005 Sierra Denali

Brand: GMC Pages: 428

Brand: Mercedes-Benz Pages: 346

Brand: Thule Pages: 4

Brand: TATA Motors Pages: 159

Ferrari 360 Map Carbon Light

Brand: MAcarbon Pages: 4

Brand: Van Guard Pages: 3

Brand: Whispbar Pages: 15

Brand: Quadratec Pages: 12

Bluetooth Kit3 PLUS

Brand: N-Com Pages: 36

Brand: Navman Pages: 10

Brand: Macrom Pages: 10

Brand: Ferve Pages: 28

Brand: Mopar Pages: 18

Brand: Phonocar Pages: 28

Brand: Volvo Pages: 362

Brand: Blaupunkt Pages: 6

Outlander Plug-in hybrid

Brand: Mitsubishi Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands