manualshive.com logo in svg

Chevrolet Traverse 2014, Owner'S Manual

The Chevrolet Traverse 2014 comes with a valuable resource known as the "Getting To Know Manual" – a comprehensive user manual that provides essential information for optimum utilization. Easily accessible and free to download from manualshive.com, this manual is your key to mastering every aspect of your Chevrolet Traverse 2014 experience.

Share
Download
background image

Black plate (18,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

6014422) - 2014 - crc - 8/15/13

10-18

Vehicle Care

If the overheat warning is displayed
with no sign of steam:

1. Turn the air conditioning off.

2. Turn the heater on to the highest

temperature and to the highest
fan speed. Open the windows as
necessary.

3. When it is safe to do so, pull off

the road, shift to P (Park) or
N (Neutral), and let the
engine idle.

If the temperature overheat gauge is
no longer in the overheat zone or an
overheat warning no longer
displays, the vehicle can be driven.
Continue to drive the vehicle slow
for about 10 minutes. Keep a safe
vehicle distance from the car in front
of you. If the warning does not come
back on, continue to drive normally
and have the cooling system
checked for proper fill and function.

If the warning continues, pull over,
stop, and park the vehicle
right away.

If there is no sign of steam, idle the
engine for three minutes while
parked. If the warning is still
displayed, turn off the engine until it
cools down. Also, see

“

Overheated

Engine Protection Operating Mode

”

next in this section.

Overheated Engine
Protection
Operating Mode

This emergency operating mode lets
the vehicle be driven to a safe place
in an emergency situation. If an
overheated engine condition exists,
an overheat protection mode which
alternates firing groups of cylinders
helps prevent engine damage. In
this mode, there is a significant loss
in power and engine performance.
The temperature gauge indicates an
overheat condition exists. Driving
extended distances and/or towing a
trailer in the overheat protection
mode should be avoided.

{

Caution

After driving in the overheated
engine protection operating
mode, the engine oil will be
severely degraded. Any repairs
performed before the engine is
cool may cause engine damage.
Allow the engine to cool before
attempting any repair. Repair the
cause of coolant loss, change the
oil, and reset the oil life system.
See

Engine Oil on page 10-7

.

Power Steering Fluid

Summary of Contents for Traverse 2014























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Traverse 2014

Abarth 595 Owner'S Handbook Manual preview
595
Brand: Abarth Pages: 176
JETBAG 320 Fitting Instructions Manual preview
320
Brand: JETBAG Pages: 44
Yakima K343 Manual preview
K343
Brand: Yakima Pages: 11
Phonocar VM350 Mounting Instructions preview
VM350
Brand: Phonocar Pages: 2
XTC ATS-POL-GBU Manual preview
ATS-POL-GBU
Brand: XTC Pages: 4
TATA Motors Tata Indigo Diesel Owner'S Manual & Service Book preview
Tata Indigo Diesel
Brand: TATA Motors Pages: 190
Safe Fleet Prime Design HBR-E-FT33B Assembly Instructions Manual preview
Prime Design HBR-E-FT33B
Brand: Safe Fleet Pages: 12
Fab Fours F2950 Installation Instructions Manual preview
F2950
Brand: Fab Fours Pages: 21
Reese Explore 63153 Instruction Manual preview
63153
Brand: Reese Explore Pages: 9
Daesung HM-TX-315 User Manual preview
HM-TX-315
Brand: Daesung Pages: 9
Pontiac 2010 Vibe Owner'S Manual preview
2010 Vibe
Brand: Pontiac Pages: 318
Vangear Woody-Pod Instruction Manual preview
Woody-Pod
Brand: Vangear Pages: 5
Safe Fleet FRC SafeTrack Hardware Installation Manual preview
FRC SafeTrack
Brand: Safe Fleet Pages: 20
Buick 1997 Skylark Owner'S Manual preview
1997 Skylark
Brand: Buick Pages: 371
Brodit ProClip 854399 Installation Instructions preview
ProClip 854399
Brand: Brodit Pages: 2
Metra Electronics 99-9302 Installation Instructions Manual preview
99-9302
Brand: Metra Electronics Pages: 8
Edelbrock Honda XR400 Instruction Supplement preview
Honda XR400
Brand: Edelbrock Pages: 2
Hudson Super Six 1916 Reference Book preview
Super Six 1916
Brand: Hudson Pages: 77

Brands by name

Popular brands

Load more brands