Black plate (4,1)
Chevrolet Spark EV Owner Manual (GMNA-Localizing-U.S./Canada-
5853485) - 2014 - CRC - 4/2/13
2-4
Keys, Doors, and Windows
Q
(Lock):
Press to lock all doors.
The hazard warning lamps will flash
once and the anti-theft alarm system
will be armed. See
Vehicle Alarm
System on page 2-13
.
If the driver door is open when
Q
is
pressed, all doors lock and then the
driver door will unlock if the
Unlocked Door Anti Lock Out
feature is enabled through the
vehicle personalization. See
“
Unlocked Door Anti Lock Out
”
under
Vehicle Personalization on
page 5-37
. This may vary based on
vehicle personalization.
7
(Panic Alarm):
Press and
release one time to initiate vehicle
locator. The exterior lamps flash and
the horn chirps three times. Press
and hold for three seconds to sound
the panic alarm. The horn sounds
and the turn signals flash for
30 seconds. Press again or start the
vehicle to cancel the panic alarm.
U
(Remote Start):
Press and
release
Q
and then immediately
press and hold
U
at least
four seconds to start the vehicle's
heating or air conditioning systems
and rear window defogger from
outside the vehicle using the RKE
transmitter. See
Remote Start on
page 2-7
.
W
(Stop Charge):
If equipped with
DC charging, press and hold to stop
the charge. See
Plug-In Charging
on page 9-33
.
Programming Transmitters to
the Vehicle
Only RKE transmitters programmed
to this vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.
When the replacement transmitter is
programmed to this vehicle, all
remaining transmitters must also be
reprogrammed. Any lost or stolen
transmitters will no longer work
once the new transmitter is
programmed. Each vehicle can
have up to eight transmitters
matched to it.
Programming with a Recognized
Transmitter
A new transmitter can be
programmed to the vehicle when
there is one recognized transmitter.
To program, the vehicle must be off
and all of the transmitters, both
currently recognized and new, must
be with you.