Black plate (24,1)
Chevrolet Spark EV Owner Manual (GMNA-Localizing-U.S./Canada-
5853485) - 2014 - CRC - 4/2/13
5-24
Instruments and Controls
The charge level setting should be
configured to match the electrical
current rating for the electrical outlet
that the charge cord is connected
to. The charge level settings are:
.
Maximum: Limits AC current to
12 amps
.
Reduced: Limits AC current to
8 amps
Exact current levels may vary from
the values shown in this manual.
Please check the vehicle for the
current available levels.
The charge level setting can be
changed at any time while the
center stack display is operable.
From the Immediately charge mode
status screen, select Change
Charge Level. From the Departure
Time or Rate & Departure Time
charge mode status screens, select
Settings and then Change Charge
Level.
The charge level setting must be
updated prior to the vehicle being
charged and the charge level setting
will reset to a default value when the
vehicle is shifted from P (Park).
{
Warning
Using a charge level that exceeds
the electrical circuit or electrical
outlet capacity may start a fire or
damage the electrical circuit. Use
the lowest charge level until a
qualified electrician inspects your
electrical circuit capacity. Use the
lowest charge level if the
electrical circuit or electrical outlet
capacity is not known.
Departure Time Entry
From the Departure Time or Rate &
Departure Time charge mode status
screen, press Settings to change
the departure time to match your
personal schedule.
1. For the Departure Time charge
mode, press Edit Departure
Time. Or, for the Rate &
Departure Time charge mode,
press Edit Schedule and then
Edit Departure Time.
2. Press
y
or
z
to change the
hours and minutes.
3. Press
y
or
z
to change AM
or PM.
4. Press
4
to exit the screen.
Charge Rate Selection
From the Rate & Departure Time
screen, press Settings and then
press Edit Schedule to select
charge rate settings and edit the
charge rate information.
