Black plate (4,1)
Chevrolet Spark EV Owner Manual (GMNA-Localizing-U.S./Canada-
5853485) - 2014 - CRC - 4/2/13
5-4
Instruments and Controls
INT: (Intermittent Wipes):
Move
the lever up to INT for intermittent
wipes, then turn the
x
INT band
up for more frequent wipes or down
for less frequent wipes.
OFF:
Use to turn the wipers off.
8
(Mist):
For a single wipe, briefly
move the wiper lever down. For
several wipes, hold the wiper
lever down.
Clear snow and ice from the wiper
blades before using them. If frozen
to the windshield, carefully loosen or
thaw them. Replace damaged wiper
blades. See
Wiper Blade
Replacement on page 10-15
.
Heavy snow or ice can overload the
wiper motor. A circuit breaker will
stop the motor until it cools down.
Windshield Washer
Pull the windshield wiper lever
toward you to spray windshield
washer fluid and activate the wipers.
The wipers will continue until the
lever is released or the maximum
wash time is reached.
When the windshield wiper lever is
released, additional wipes may
occur depending on how long the
windshield washer had been
activated. See
Washer Fluid on
page 10-9
for information on filling
the windshield washer fluid
reservoir.
{
Warning
In freezing weather, do not use
the washer until the windshield is
warmed. Otherwise the washer
fluid can form ice on the
windshield, blocking your vision.
Rear Window Wiper/
Washer
If equipped with the rear wiper/
washer, the controls are on the end
of the windshield wiper lever.
Turn the rear wiper/washer band to
operate the rear window wiper/
washer.
ON:
Turns the rear wiper on for
continuous wipes.
OFF:
Turns the rear wiper off.
=
(Rear Washer):
Turn the band
up or down towards
=
to spray
washer fluid on the rear window.
The control returns to its starting
position when released.