Black plate (69,1)
Chevrolet Equinox and GMC Terrain Navigation System (Include Mex) - 2012
Infotainment System
69
Using the
“
Dial
”
or
“
Call
”
Command
1. Press
b
/
g
.
2. Say
“
Dial
”
or
“
Call.
”
3. Say the entire number without
pausing or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Using the
“
Digit Dial
”
Command
The digit dial command allows a
phone number to be dialed by
entering the numbers, one digit at a
time. After each number is entered,
the system repeats back the number
it heard followed by a tone.
If an unwanted number is
recognized by the system, say
“
Clear
”
at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
“
Verify
”
at any time.
1. Press
b
/
g
.
2. Say
“
Digit Dial.
”
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the
last digit has been entered,
say
“
Dial.
”
Once connected, the person called
will be heard through the audio
speakers.
Using the
“
Re
‐
dial
”
Command
1. Press
b
/
g
.
2. After the tone, say
“
Re
‐
dial.
”
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
.
Press
b
/
g
to answer the call.
.
Press
8
/
i
to ignore the call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
.
Press
b
/
g
to answer an
incoming call when another call
is active. The original call is
placed on hold.
.
Press
b
/
g
again to return to
the original call.
.
To ignore the incoming call, no
action is required.
.
Press
8
/
i
to disconnect the
current call and switch to the call
on hold.
