Chevrolet 2009 Corvette, Owner'S Manual

Page: 228 / 440

Playing a CD
O
e (Tune): Turn to go to the next or previous track.
{
(Reverse): Press and hold to reverse within the
current track.
|
(Fast Forward): Press and hold to fast forward
through the current track.
t
SEEK
u
: Press the left arrow to go to the start of
the current track if more than eight seconds have played.
Press the right arrow to go to the start of the next track.
If either arrow is held or pressed more than once, the
player continues moving backward or forward through
the CD.
t
SCAN
u
: To scan one CD, press and hold either
arrow for more than two seconds until SCAN displays and
a beep sounds. The radio goes to the next track, plays
for 10 seconds, then goes to the next track. Press either
arrow again, to stop scanning.
To scan all loaded CDs, press and hold either arrow for
more than four seconds until SCAN displays and a beep
sounds. Use this feature to listen to 10 seconds of the
first track of each loaded CD. Press either arrow again,
to stop scanning.
AUTO EQ (Automatic Equalization): Press to
select the equalization setting while playing a CD.
The equalization is stored when a CD is played.
For more information on AUTO EQ, see “AUTO EQ”
listed previously in this section.
BAND: Press to listen to the radio when a CD is
playing. The inactive CD(s) remains inside the radio
for future listening.
CD AUX (Auxiliary): Press to play a CD when listening
to the radio. CD displays when a CD is in the player. If
your system has a remote playback device, pressing this
button a second time allows the remote device to play.
X (Eject): Press to eject a CD from the Single CD
Radio and the Six-Disc CD Radio.
Single CD Radio: Press X to eject a CD.
Six-Disc CD Radio:
Press X to eject the CD that is currently playing.
To eject multiple CDs:
1. Press and hold
X
for two seconds. A beep sounds
and EJECT ALL displays.
2. The ejected CD can be removed when REMOVE
DISC displays.
To stop ejecting the CDs, press the
M
or X .
3-90