Chevrolet 2009 Corvette Owner'S Manual Download | Manualshive

Page: 202 / 440

background image

NO FOB - OFF OR RUN?

This message displays when the keyless access
transmitter is not detected inside the vehicle while you
are trying to turn the ignition off. The vehicle may be
near a strong radio antenna signal causing the keyless
access system to be jammed. The vehicle will remain in
ACCESSORY until the vehicle is turned off or is restarted,
or five minutes has expired. If you turn the ignition off and
you cannot find the keyless access transmitter, you will
not be able to restart the vehicle. The keyless access
transmitter needs to be inside of the vehicle in order for
the vehicle to start. See Starting the Engine on page 2-24
for more information.

OPTIONS UNAVAILABLE

This message displays for a few seconds if a keyless
access transmitter that is not labelled 1 or 2 is used
and you try to personalize the features on the vehicle
by pressing the OPTION button. The personalization
system will not recognize the transmitter and the DIC
will not display the current driver number or the menus
used to set personalizations. The personalization
features will then be set to the default states. See DIC
Vehicle Personalization on page 3-73 for more
information.

PRESS BRAKE TO START ENGINE
(Automatic Transmission Only)

This message displays if you try to start the engine by
pressing the keyless ignition start button without having
the brake pressed. The brake needs to be pressed when
starting the engine. See Ignition Positions on page 2-23
for more information.

REDUCED ENGINE POWER

If this message displays and the check engine light
comes on, a noticeable reduction in the vehicle’s
performance may occur. If the REDUCED ENGINE
POWER message is displayed, but there is no
reduction in performance, proceed to your destination.
The performance may be reduced the next time the
vehicle is driven.

The vehicle may be driven at a reduced speed while the
REDUCED ENGINE POWER message is displayed, but
acceleration and speed may be reduced. Anytime the
check engine light stays on, the vehicle should be taken
to your dealer/retailer as soon as possible for diagnosis
and repair. See Malfunction Indicator Lamp on page 3-44
for more information.

3-64

«
...
200
201
202
203
204
...
»

Summary of Contents for 2009 Corvette

























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 Corvette

Brand: Honda Pages: 73

Brand: CITROEN Pages: 52

Brand: BrandMotion Pages: 2

Brand: Menabo Pages: 12

Brand: Metra Electronics Pages: 8

Brand: Caltrend Pages: 2

Brand: Advanced ICE Pages: 4

Brand: Vauxhall Pages: 259

Brand: Oldsmobile Pages: 380

Brand: TAUBENREUTHER Pages: 18

Brand: Gator Pages: 6

Brand: F.lli Menabo Pages: 16

Brand: Ford Pages: 8

Brand: Nos Pages: 22

Brand: QA1 Pages: 4

Brand: Adaptiv Mini Pages: 4

CommCenter 300MB-SD

Brand: Federal Signal Corporation Pages: 60

Brand: Stack Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands