Chevrolet 2009 Corvette Page 123 Owner'S Manual Download

Page: 123 / 440

7. To unlock the rear of

the roof panel’s rear
release latch, press the
back of the release
handle (B). Then press
the button on the
front of the release
handle (A).

Pull down the latch lever.

8. Stand on one side of the vehicle, and if necessary,

have someone stand on the other side. Together,
carefully lift the front edge of the roof panel up
and forward.

9. When the roof panel is loosened from the vehicle,

one person should grasp the roof panel as close to
the center as possible and lift it away from the
vehicle.

2-59

Summary of Contents for 2009 Corvette

























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Corvette

Reviews:

Related manuals for 2009 Corvette

Brands by name

Popular brands

Chevrolet 2009 Corvette, Owner'S Manual

Search results

Summary of Contents for 2009 Corvette

Reviews:

Related manuals for 2009 Corvette

Brands by name

Popular brands