Chevrolet 2009 Corvette Owner'S Manual Download Page 7

Page: 7 / 440

Power Seats

To adjust a power seat:

•

Move the control forward or rearward to adjust the
seat forward or rearward.

•

Move the front or rear of the control up or down to
adjust the height of the seat cushion.

Your seat position can be stored and recalled if you have
the memory option. See Memory Seat, Mirrors and
Steering Wheel on page 1-4.

Power Lumbar and Side Bolsters

On vehicles with power lumbar and side bolsters:

Move (A) forward or rearward to adjust lumbar support.

Move (B) up or down to adjust the side bolsters.

1-3

Summary of Contents for 2009 Corvette

























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Corvette

Reviews:

Brands by name

Popular brands

Chevrolet 2009 Corvette, Owner'S Manual

Search results

Summary of Contents for 2009 Corvette

Reviews:

Brands by name

Popular brands