manualshive.com logo in svg

Chevrolet 2009 Cobalt, Owner'S Manual

Share
Download
Chevrolet 2009 Cobalt Owner'S Manual Download Page 9

{

CAUTION:

If either seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatbacks to be sure they
are locked.

Your seats have manual reclining seatbacks. The lever
used to operate them is located on the outboard side
of the seats.

To recline the seatback, do the following:

1. Lift the recline lever.
2. Move the seatback to the desired position, then

release the lever to lock the seatback in place.

3. Push and pull on the seatback to make sure it is

locked.

To return the seatback to an upright position, do the
following:

1. Lift the lever fully without applying pressure to the

seatback and the seatback will return to the upright
position.

2. Push and pull on the seatback to make sure it is

locked.

1-5

Summary of Contents for 2009 Cobalt





















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands