Chevrolet 2009 Cobalt Owner'S Manual Download Page 349

Page: 349 / 436

A. Cover

B. Retainer

C. Spare Tire

D. Wing Nut

E. Jack and Wheel Wrench

F. Bolt

3. Remove the retainer (B) that holds down the spare

tire. See Compact Spare Tire on page 5-109 for
more information.

4. Remove the spare tire (C) by gently pulling it up

and out of the trunk.

5. Remove the wing nut (D) that holds the jack and

remove the jack and wheel wrench (E).

Uplevel Models

1. Open the trunk. See Trunk on page 2-12.

2. Lift the trunk liner to access the spare tire and tools.

5-91

Summary of Contents for 2009 Cobalt





















































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Cobalt

Reviews:

Brands by name

Popular brands

Chevrolet 2009 Cobalt, Owner'S Manual

Search results

Summary of Contents for 2009 Cobalt

Reviews:

Brands by name

Popular brands